|
Clean the surface where
the decal will be applied. If there is any wax or oil on the surface,
use rubbing alcohol. This will remove any wax, oil or dust particles
that may prevent the decal from sticking. After wiping the area with
alcohol, it is best to wipe the surface with a cloth dampened with
clean water. |
|
|
|
Turn the decal facing down
on a flat surface (table) and carefully remove the paper backing. |
|
|
|
Hold the decal in
position and stick the top or one side holding the other side up and
away from the surface. Rub the entire area beginning at the top or side
that is on the surface firmly from one side to the other using the edge
of a card. Be sure to run the card several time across the decal to
assure that it will adhere to the surface. |
|
|
|
Remove the application
tape by pulling gently in a downward movement. If part of decal starts
to come up, rub it back down while the tape is still on and proceed to
remove the tape. If you get an air bubble in the decal, leave the bubble
alone it will go away with in a few weeks. |
|
|